How to Connect to Remote Access VPN from Windows 10?

Virtual private networks (VPNs) are networks of private servers that run VPN services to create private “channels” for Internet browsing. VPN services provide secure Internet connections through this infrastructure. This is conducive to maintaining the integrity of business communication or managing anonymity when surfing the Internet. If you are looking for a safe and simple way to encrypt your Internet use, Remote Access VPN is right for you.

This blog shows you how to connect to remote access VPN from Windows 10. This is not the sales page of the VPN server. If you are considering remote access VPN or personal VPN, you should look at the DBM VPN server.

Now, you can simply follow this step-by-step guide:

11 Steps: Connect to Remote Access VPN from Windows 10

1、Open the Control panel， and set up a new connection or network.

Open Control panel, then click“network and Internet > network and Sharing Center > setup a new connection or network”.

2、Select " Connect to a workplace".

3、Create a new connection.

4、Select "Use my Internet connection (VPN)".

5、Create the VPN connection.

Enter the firewall IP address and enter any name in the Destination name area. then click “create” to create the VPN connection.

6、Click "Change adapter settings".

Open Network and Sharing Center again then Click “Change adapter settings”.

7、Select properties.

Find out the VPN connection you created then right-click the VPN and then select properties.

8、Set the VPN connection type.

PPTP: In the VPN connection properties window, click the “Security” tab and set the VPN connection type to “Point to Point Tunneling Protocol (PPTP)”.

L2TP: In the VPN connection properties window, click the “Security” tab and set the VPN connection type to “Layer 2 Tunneling Protocol with IPsec (L2TP/IPsec)”, and then click “Advanced settings” to enter the preshared key.

9、Allow the protocols "CHAP" and "MS-CHAP V2", and click "OK"

10、Double click the VPN connection and click the Connect button.

11、Enter user name and password, then click "OK"

Congratulations to you if you can see “Connected”, Then you can access your server by RDP now. if your servers are using an internal IP address, You can RDP access your servers through 10.10.XX.XXX or 192.168.X.XXX.

Notice: If you want to keep the public network in your local, please do the following setting:

This is all about how to connect to remote access VPN from Windows 10. I hope this article can help you successfully connect to a remote connection.

Remote access virtual private network (VPN) enables users working remotely to safely access and use applications and data located in the company’s data center and headquarters, and encrypt all traffic sent and received by users. If you are considering remote access VPN or personal VPN, you can check the DBM VPN server.

How to Connect to Remote Access VPN from Windows 10?

11 Steps: Connect to Remote Access VPN from Windows 10